| |
NL1VKL > ALL 07.04.23 08:00l 49 Lines 1719 Bytes #999 (0) @ WW
BID : 36040NL1VKL
Read: GUEST
Subj: Re: XrPi and LinFBB - Traffic Monitor not working
Path: FU0BOX<CB0ESN<BLM274<DBX320<MD2BBS<FRB024<BBS540<BBS645<FRA001<NL3VKL<
NL3VKL
Sent: 230406/1850 @:NL3VKL.NBO.NLD.EU Sally 7.2.055 NL1VKL.NL3VKL.NBO.NLD.EU $:
Message from: NL1VKL@NL3VKL
Quoting from a previous message...
>
> From: PT0BBS@PT0BBS.PRT.EU
> To : ALL@WW
>
> verybody,
> I've been working with XrPi for a few time, but I'm already a big fan of
this
> spectacular software.
> So, I put it working with LinFBB in the same Raspberry Pi and it works
great.
> Thanks to the packet-radio.net website, which is very well maintained!
> The only issue I see is the lack of monitoring the traffic frames...
> The Mail beacon is also not transmitted. Does anyone facing the same
situation?
> How can I transmit the LinFBB Mail beacon, at least?
> I appreciate any answers.
> Thank you for your attention.
> Best 73!
> Joe - PT0BBS-5 + PT0NOD-8
>
Hi Joe
Have you setup a per port beaconX.sys file in LinFBB's config?
To broadcast a mail beacon (and unproto) you need at least one beaconX.sys
file. X stands for the port number (from port.sys) where LinFBB should
broadcast the beacon and unproto frames.
73! Dave de NL1VKL
====================================================================
_____ __ ___ _____ _____ __
| | | | |_ | | | | | | | Sysop: Dave
| | | | |__ _| |_| | | -| |__ QTH: Uden - JO21TP
|_|___|_____|_____|\___/|__|__|_____| BBS: NL3VKL.NBO.NLD.EU
QRV: 27.235 MHz (FM 1k2)
27.365 MHz (LSB 1k2)
NL3VKL BBS
NL5VKL Net/Rom node / internet gateway https://nl5vkl.mijndingen.nl
====================================================================
** This message is generated with Sally 7.2.055
-----------------------------------------------------------------
Lese vorherige Mail | Lese naechste Mail
| |
